Bridgepoint Systems, Extraction Rinse, Flex Fire (Multiple Sizes)
SKU #:
CONFIG148297
SKU #:
CONFIG148297
Our hottest, most effective cleaning rinse ever. Flex FIRE extraction rinse is a high pH rinsing solution designed specifically for exceptionally soiled commercial carpet when all others have failed. Combine with Flex Powder with Citrus Solv to remove traffic lanes previously considered uncleanable.
DIRECTIONS:
To be used as the primary cleaning agent, or as a rinse agent, in the extraction process for heavily soiled commercial carpets. It’s highly recommended that a water softener be used for best performance results and to prevent precipitation caused by high heat truckmounts and hard water. Flex FIRE uses special rinse agents that perform best in warm water, temperatures above boiling will cause product separation. If a water softener is not used, reduce heat to below 200 degrees.
For truckmount concentrate: Add 1 to 2 cups of Flex FIRE rinse to five gallons of cold or warm water. Mix thoroughly until dissolved. For systems metered on low settings, or for excessively soiled carpets, 3 cups may be used.
For portable equipment: Use 1 ounce of Flex FIRE rinse per 5 gallons hot water. For extra heavy soil use 2 ounces per five gallons of hot water.
Dilution: 1 oz./5 gal. RTU pH: 11.3-11.5 Contains: 6 pounds
Learn more about using alkaline rinses effectively on carpet.
Available in 6 lb. Jars Part #1627-4983
Available in 36 lb. Pail Part #1630-4089
Available in 370 lb. Drum Part #1631-4080
SKU | CONFIG148297 |
---|---|
Pricing SKU | 148297 |
Size | 6 lbs |
Catalog # | 1627-4983 |
Pack Size | 1/gl |
UOM | gl |
Manufacturer Part # | CC225A |
Brand | Bridgepoint Systems |
pH | 11.0-12.0 |